JMT X180 DIY Racing Drone Quadcopter Combo Frame w/ EMAX RS2306 2750KV 2400KV Brushless Motor + BLHeli-s 30A / 4in1 20A 12A ESC Propellers Set
Frame Set Type: Unassembly, With ESC/Motor/Power Distribution Board/Propellers. Not include Flight Controller/Receiver and other spare parts.
1x JMT X180 Carbon Fiber Frame Kit
4x EMAX RS2306-2400KV/2750KV Motor (Please choose the Motor you want)
6 kinds ESCs Optional: 4x HobbyWing XRotor Micro BLHeli-s 30A ESC Support DShot600/ 4x EMAX BLS Bullet 30A ESC / 1x HobbyWing XRotor 20A Micro 4in1 ESC / 1x HobbyWing XRotor 12A Micro 4in1 ESC / 4x Flycolor 30A BLHeli OPTO RAPTOR MINI ESC / 4x Flycolor Raptor BLS Pro 30A BLHeli-S ESC
1x Mini Power Distribution Board PDB with BEC 5V & 12V
1x Magic Sticker belt strap
2x 4x4x4 4040 4-blade 4 inch Props CW CCW Propellers
4x Motor Cover Protection
1x Spare Parts Bag
1, With 1.5mm roof, 2.5mm arm in one frame, 3K carbon fiber board carved craft to achieve light, while stable.
2, Frame made of a positive X structure, which is very suitable for racing, faster, more violent, more flexible, more stable with the center gravity.
3, With high-strength aluminum column, sandblasting process, color black made it more tough, more gorgeous.
Bottom plate: 3mm;
How far can this aircraft fly?
A: The distance is determined by the launching distance of the remote control (transmitter).
2. Do the propellers can use other sizes?
A: We recommend you use 3 inch -4 inch blades.
3. Can the battery be bigger?
A: It can be slightly larger, for example, 3s 1500mah. (In order to ensure the application of stable camera voltage , we recommend 3s battery.)
4. Which receiver modes does the aircraft support?
A: support SBUS, PPM (need to reserve a connection cable for the receiver), PWM (needs to get another 1.0 6pin cable)
5. Can we get a recommend of remote control, monitor, FPV glasses?
A: Yes, just tell the customer service the equipment you want to match, we will confirm all the items for your needs, and set down all the data for you, then delivery the product to you.
6. How to choose a good flight conditions?
A: No shelter, no wires, no mobile phone base stations around, NO high-voltage wire, electronic fence and other interference.
7. Tighten the propeller and confirm that it is tight, and make sure the blades are installed with correct order, and battery, remote control's power is full to fly.
Mini Power Distribution Board:
- 2oz copper & 4-layers PCB.
- ESC & Battery solder tabs in pairs
- Solder Bridges of various voltage for Camera & VTX.
- DC/DC synchronous buck regulator, Efficiency is up to 95%.
- TVS(Transient Voltage Suppressor) protection for DC/DC chip.
- 5V & 12V Output LED indicators & Short circuit tolerant
Brand name: Emax
Item name: EMAX RS2306 2750KV /2400KV motor
KV: 2750 / 2400 options
No. of cells(Support Lipo): 3-5S (11.1V-18.5V)
Propeller: 5 inches
Cool white + red bottom
EMAX RS2306-2750KV + HobbyWing XRotor Micro BLHeli-s 30A ESC Support DShot600
Product Parameter :
Item Name : XRotor BLHeli-S-Dshot600 30A
Con/Peak .Current : 30A /40A (10S)
Support Volatge : 2-4S
Firmware : BLHeli-S A-H-50 16.5 Version
Programming : Remote Control , BLHeliSuite
Support Signal : PWM ,Oneshot125, Oneshot42, Multishot
Size: 23.8*14.5*5.8mm(Exclude Wire)
Weight : 6g ( Exclude Wire )
EMAX RS2306-2750KV + EMAX Mini ESC Dshot BLS Bullet 30A ESC
Item Name : New EAMX FPV Dshot Bullet ESC
Suit for : 130 RC FPV Racer Drone Multicopter
Firmware : BLHeli_S
Support : MultiShot ,Oneshot42,OneShot125
1. super-mini, ultra-light ESC.
2.BLHeli-S firmware (16.5)/ Supports DSHOT, MULTISHOT, ONESHOT42, ONESHOT125.
3.New heat sink design both effectively reduces the core temperature, and avoids propeller strike damage
4.Top quality MOSFET, ceramic capacitors. 3oz high TG PCB board, significantly improves heat dissipation and improves system efficiency.
EMAX RS2306-2750KV + Hobbywing XRotor 4 IN 1 Micro 3-4S Build-in BEC 20A ESC Support oneshot125
1. Not only integrates four high performance 20A ESC, but also built-in BEC, provide multiple 5.3V / 12V output interface of the flight control, image transmission, camera, on-board lighting etc for standby power supply
2. Real-time detection :detection with current and voltage interface for flight control current and voltage of conduct .
3. After such a highly integrated, and only through the flight control unit of the same size,More convenient installation, wiring more concise.
EMAX RS2306-2750KV + Hobbywing Xrotor 12A 4IN1 1-4S Micro Brushless ESC 5v 1A Speed Controller Support oneshot125
Cont./Peak Current :12A×4/18A×4
LiPo Cells : 1-4S LiPo
BEC Output : 5V,1A
Wires & Connectors
Input Wires :Red-18AWG-100mm*1 / Black-18AWG-100mm*1
Output Wires: solder tabs
Input Connectors :No
Output Connectors : No
(Note: All the wire length above is the original length not the length you see from the outside.)
EMAX RS2306-2400KV + Flycolor 20A 30A BLHeli OPTO RAPTOR MINI ESC
1,for 2-4s battery
2,light weight,only about 9.7g per pcs
3,mini size,easy to mount with your copter
4,F330 main control chip,Zero latency operation
5,working current: 20A or 30A
7,Quantity: 4 pcs
EMAX RS2306-2400KV + Flycolor Raptor BLS Pro 30A BLHeli-S ESC Speed Controller Dshot Supported
30A 2-4S Raptor ESC-Pro (Continuous current: 30A, Peak current: 40A)
Name: Raptor BLS Pro